Qingte Group Co., Ltd.

PRODUCT

Your Site: Home>PRODUCT >Special vehicle>

Garbage collecting vehicle

Closed Barreled Waste Transport Vehicle(National V standard)

Closed Barreled Waste Transport Vehicle(National V standard)

QDT5020XTYKBEV Closed Barreled Waste Transport Vehicle

Features

This efficient and clean closed barreled waste transport vehicle is refitted from type II chassis with body and hydraulic lifting tail gate special equipment installed and is mainly used for transshipment of household waste container, which effectively overcomes the inconvenient passage in narrow road or high-end residential for large waste transport vehicle, and also avoids the visual and odor pollution, sewage leakage and noise.  This vehicle has the following characteristics:
1. new energy power, zero emission and no pollution;
2.  steel structure frame and new glass fiber composite are adopted for the body, which makes the vehicle beautiful, light, and have long operating life and no rust; 
3.  the head cover is opened vortically through the drive of oil cylinder, and the staff can enter in and out of the body conveniently without bending down;
4. side door is opened for both sides of the body, rapidly realizing the replacement of waste container and empty barrel;
5. The mechanical electrical and hydraulic integrated technology is adopted, with high automation level, low noise, reliable operation and user-friendly control, and the whole process only needs one driver.
6. With good lifting performance and safety and reliability, the hydraulic tail gate special equipment loads the waste container rapidly, safely and efficiently. 
7. Multilayer sewage leakage diversion and receiving device is equipped to avoid secondary pollution caused by accidental damage of the waste container.  The fully closed transportation realizes the environmental protection transportation mode with seepage control of rainwater and control of sewage leakage.
8. The complete vehicle has good-looking appearance and is easy to wash, and the smooth outside surface is suitable for large area of public service advertising.

Parameters

Description Technical Parameters
Chassis model KMC1021EV29D
Driving motor model GLMI15A1
Driving motor power kw 20 (rated)/40 (peak value)
Fuel type Pure electric
Storage battery Model and Type 32650-5AH phosphoric acid iron battery
Total nominal voltage of storage battery V 320
Total nominal capacity of storage battery Ah 100(30.4°)
Maximum speed (Km/h) 80
Distance per charge (km) 120-150km
Charging time (h) Rapid charge 2-3h, trickle charge 8-10h
Wheel base (mm) 2900
Dimension (L mm x W mm x H mm) 5010X1710X2180
Total mass (kg) 2450
Kerb mass (kg) 1860
Rated load (kg) 460
Tire specification 165/70R14LT
Approach/departure angle (°) 12/30
Internal dimension of tank (L x W x H) mm 3000x1530x1380
3000x1530x1380
Number of waste container loaded 8 x 240L standard waste containers
Rated pressure of hydraulic system Mpa 19
Maximum lifting weight of hydraulic pressure tail gate (kg) 500
Opening and closing time (s) 10/15
Lifting time of hydraulic lifting tail gate load (s) 45
Descending time of hydraulic lifting tail gate load (s) 40